Signal Converter Isolator


Image

Synopsis:-

  • Current Transducer to Current Convertor.
  • Input Non Polarity Signal (A.C).
  • From Current Transducer (0-1Amp. / 0-5 Amp. AC) At Field.
  • Galvanic Isolation (1.5KVAC) between Input, Output and Power Supply Section.
  • Isolated (4-20mA) current signals accurately to the PLC or DCS.
  • Power Supply Non Polarity.
  • Auxiliary Power Supply 48-265VAC/ 24-265 DC Nominal.
  • Zero & Span Adjustment for the device is available.

  • pdf Datasheet
Image

Synopsis:-

  • Current Transducer to Voltage Convertor.
  • Input Non Polarity Signal (A.C).
  • From Current Transducer (0-1Amp. / 0-5 Amp. AC) At Field.
  • Galvanic Isolation (1.5KVAC) between Input, Output and Power Supply Section.
  • Isolated (0-10V DC) voltage signals accurately to the PLC or DCS.
  • Power Supply Non Polarity.
  • Auxiliary Power Supply 48-265VAC/ 24-265 DC Nominal.
  • Zero & Span Adjustment for the device is available.

  • pdf Datasheet
Image

Synopsis:-

  • Single Channel Current to Voltage Convertor.
  • Input Reverse Polarity Protected.
  • For Analog Input (4-20mA) Current Signal from 2 wire Device (At Field).
  • Galvanic Isolation (1.5KVAC) between Input, Output and Power Supply Section.
  • Isolated Active (0-10VDC) to the PLC or DCS.
  • Non Polarity Power Supply Connection.
  • Auxiliary Power Supply 24VDC/ AC Nominal.
  • Zero & Span Adjustment for the device is available.

  • pdf Datasheet
Image

Synopsis:-

  • Single Channel Load Cell to Current Convertor.
  • Input Reverse Polarity Protected.
  • For Load Cell (Millivolt) Signal from 2 wire Device (At Field).
  • Galvanic Isolation (1.5KVAC) between Input, Output and Power Supply Section.
  • Isolated Active (4-20mA) to the PLC or DCS.
  • Non Polarity Power Supply Connection.
  • Auxiliary Power Supply 24VDC/AC Nominal.
  • Zero & Span Adjustment for the device is available.

  • pdf Datasheet
Image

Synopsis:-

  • Single Channel Load Cell to Voltage Convertor.
  • Input Reverse Polarity Protected.
  • For Load Cell (Millivolt) Signal from 2 wire Device (At Field).
  • Galvanic Isolation (1.5KVAC) between Input, Output and Power Supply Section.
  • Isolated Active (4-20mA) to the PLC or DCS.
  • Non Polarity Power Supply Connection.
  • Auxiliary Power Supply 24VDC/AC Nominal.
  • Zero & Span Adjustment for the device is available.

  • pdf Datasheet
Image

Synopsis:-

  • Single Channel Millivolt to Current Convertor.
  • Input Reverse Polarity Protected.
  • For Analog Input (0-500mV) Signal from 2 wire Device (At Field).
  • Galvanic Isolation (1.5KVAC) between Input, Output and Power Supply Section.
  • Isolated Active (4-20mA) to the PLC or DCS.
  • Non Polarity Power Supply Connection.
  • Auxiliary Power Supply 24VDC/AC Nominal.
  • Zero & Span Adjustment for the device is available.

  • pdf Datasheet
Image

Synopsis:-

  • Single Channel Millivolt to Voltage Convertor.
  • Input Reverse Polarity Protected.
  • For Analog Input (0-500mV) Signal from 2 wire Device (At Field).
  • Galvanic Isolation (1.5KVAC) between Input, Output and Power Supply Section.
  • Isolated Active (0-10VDC) to the PLC or DCS.
  • Non Polarity Power Supply Connection.
  • Auxiliary Power Supply 24VDC/ AC Nominal.
  • Zero & Span Adjustment for the device is available.

  • pdf Datasheet
Image

Synopsis:-

  • Single Channel Resistance to Current Convertor.
  • Input non Polarity Protected.
  • From Potentiometer resistance Signal it (At Field).
  • Galvanic Isolation (1.5KVAC) between Input, Output and Power Supply Section.
  • Isolated Current (4-20mA) to the PLC or DCS.
  • Non Polarity Power Supply Connection.
  • Auxiliary Power Supply 24VDC/AC Nominal.
  • Zero & Span Adjustment for the device is available.

  • pdf Datasheet
Image

Synopsis:-

  • Single Channel Resistance to Voltage Convertor.
  • Input non Polarity Protected.
  • From Potentiometer resistance Signal it (At Field).
  • Galvanic Isolation (1.5KVAC) between Input, Output and Power Supply Section.
  • Isolated Voltage ( 0 -10 VDC) to the PLC or DCS
  • Non Polarity Power Supply Connection.
  • Auxiliary Power Supply 24VDC/AC Nominal.
  • Zero & Span Adjustment for the device is available.

  • pdf Datasheet
Image

Synopsis:-

  • Single Channel Voltage to Current Convertor.
  • Input Reverse Polarity Protected.
  • For Analog Input (0-10VDC) Signal from 2 wire Device (At Field).
  • Galvanic Isolation (1.5KVAC) between Input, Output and Power Supply Section.
  • Isolated Active (4-20mA) to the PLC or DCS.
  • Non Polarity Power Supply Connection.
  • Auxiliary Power Supply 24VDC/Ac Nominal.
  • Zero & Span Adjustment for the device is available.

  • pdf Datasheet